Halfpipe HP 30 Carrier

Tridem Halfpipe


Tridem Halfpipe
Halfpipe HP 30 Carrier

Carrier: The well-proven vehicles of the Carrier range are designed to meet the highest demands. Based on an ingenious modular system, they have a firmly specified high-quality standard equipment and are usually available ex stock. Robust earth moving tipper with halfpipe and front press: Krampe Halfpipe HP 20, the classic on europe's constructionsites. Technical changes may be carried out in a limited scope.

Chassis: Extremely resilient chassis made of large-volume rectangular tube 300 x 150 mm/ suspended, height-adjustable drawbar for low hitch position with flanged 80 mm ball head coupling/ hydraulic support foot with double-acting ram, 6/2 way-valve to combine support foot hydraulic <> rear tailgate/ continuous tipping shaft at rear, heavy rocking ball bearings with a diameter of 80 mm/ hole pattern G 140 for rear trailer coupling/ pendle axle unit with asymmetrically offset axles, easy to pull, optimum ground adjustment due to the very large axle oscillations, good stability on rough terrain during driving but also during tipping/ user-friendly central lubrication bar/ ALB valve/ BPW axles with automatic slack adjusters (ASA)

Body: Stylish halfpipe body, sheet thickness 6 mm, material quality HARDOX 450/ front protection hood/ front tipping ram for for easy tipping and optimisation of the stability during tipping/ two-hose quick lowering system for fast tipping cycles/ body end at top designed as pointed roof, soil or stones does not remain on it/ hydraulic opening rear tailgate, additionally pendulum mounted at top to avoid damages through big stones, cutting edge all around for light and reliable closing of tailgate/ robust rubber supports between body and chassis/ bolted mudguards adjustable in width with a steep angle of attack and therefore self-cleaning

Other: 40 km/h homologation according to type approval EU (VO) 167/ 2013/ operating instructions/ robust lamp housing with pointed roof at vehicle rear, high-quality rear lights with shock-resistant lens, LED lighting system, white front position lamps, yellow side marker lamps, rear position lights/ exchangeable, modularly designed rear underride guard/ shot peened frame/ painting 2-component paint in Krampe-red (similar to RAL 3002) satin-finish


This trailer (Halfpipe HP 30 Carrier) is equipped with a fixed, high-quality standard specification.

This model is also available as a customised version:

Halfpipe HP 30

31.000 kg / 40 km/h
GVWR to Ger. Law


16,1 m³
Transport volume


140 kW (190PS)
draft requirement


Low center of gravity

The center of gravity is 200 mm lower than in conventional body tippers. In the case of the half-pipe design, there are no cross members underneath the body.

The side sheets of the body rest directly on the chassis. This significantly enhances stability on slopes and results in a lower loading height.


Goodbye dirt traps

In the design of our trailer, our engineers ensure the avoidance of external horizontal surfaces or depressions. The consistent design is focused on minimizing areas for dirt buildup. Starting from the pointed roof-like top frame, the light housings, the underbody protection, to the optimized design of the tailgate. Many small and ingenious solutions have been fine-tuned down to the smallest detail based on field reports and customer feedback. Tedious cleaning work is eliminated, and increased uptime translates to higher yield for you!


Strong dumping performance

The tipping cylinder (frontal ram) is located in front of the semi-circle body front wall, allowing the hydraulics to act exactly where lifting is easiest. This also minimizes torsion between the chassis and the body.


type-approved underride guard

The Krampe underride guard has been designed, tested, and approved in accordance with the latest European laws under EU Regulation (EU) 2015/208. This protected safety device is available in various versions. Standardized attachment points at the rear of the vehicle allow an easy replacement in case of damage and enable users to switch to a different underride guard variant at a later stage. For example, changing from a fixed to a folding underride guard can be accomplished through straightforward installation work.


Narrow drawbar for optimal turning angle

The narrow design of the drawbar on all Krampe trailer allows an exceptionally wide turning angle, making the tractor-trailer combination highly maneuverable. The drawbar varies in wall thickness depending on the vehicle size and permissible total weight. As a safety-critical component, Krampe's drawbars are robotically welded and subjected to uncompromising 100% quality inspection. On almost all vehicles, the drawbar is also equipped with rubber buffers as standard and can be adjusted to the tractor's height. Hydraulic damping systems are available as an option.


Chassis expertise

The Krampe brand stands for top-class chassis and is the benchmark in the market for driving comfort and safety. This chassis expertise is also reflected in the extensive delivery program and the tire options for the vehicles. High-quality BPW axles are installed as standard. Our chassis are not off-the-shelf, but are individually tailored to the desired application.


Technical data: Halfpipe HP 30 Carrier

*1 Eigengewicht und die Nutzlast hängen von der jeweiligen Ausrüstung ab.
*2 In Deutschland sind Stützlasten von 3 bzw. 4 t nur bis 40 km/h erlaubt. Bei Schnellläufern ab 40 km/h gelten teils niedrigere Stützlasten. Es darf die zulässige Stützlast des Zugfahrzeuges nicht überschritten werden.
*3 Einzelachslast 10 t nur bei Achsabstand 1,81 m zulässig. Beratung erforderlich.
*6 Die technische Nutzlast ist von Fahrwerk und Bereifung abhängig.

Dimensions: Halfpipe HP 30 Carrier

Ausrüstung wird geladen

Zubehör wird geladen


Professional advice?
Our sales team will be happy to help and answer all your questions about the Halfpipe HP 30 Carrier.

Krampe sales team
Fahrzeugbau GmbH

Krampe Fahrzeugbau GmbH
Zusestraße 4
D-48653 Coesfeld-Flamschen

Tel: +49 (0)25 41/80 178-0
Fax: +49 (0)25 41/80 178-14
Mail: info@krampe.de

Select language: deutsch english francais

Krampe Fahrzeugbau GmbH

Zusestraße 4 · D-48653 Coesfeld-Flamschen · Tel: +49 (0)25 41/80 178-0 · Fax: +49 (0)25 41/80 178-14 · Mail:info@krampe.de

gedruckt 12-04-2024 19:45:57 Uhr