Tridem sand and gravel tippers

SK 750


Tridem sand and gravel tippers
SK 750

For this type of vehicle: Individual vehicle construction possible
Robust earth-moving tipper with flat floor sheet and underfloor cylinder, 40 km/h version, silage extensions possible

Chassis: Torsion-resistant chassis made of large-volume rectangular tube 300 x 200 mm/ suspended height-adjustable drawbar for low hitch position, shaft drawbar eye with 80 mm ball head coupling/ hydraulic support foot with double acting ram, 6/2 way valve to combine support foot <> hydraulic rear tailgate/ heavy 100 mm diameter rocking ball bearings/ hole pattern G 140 for salvage drawbar eye at vehicle rear/ 36 t parabolic springs with trailing arms/ ALB valve for automatic braking force control/ BPW axles with automatic slack adjusters (ASA), version with two caster steering axles (front and rear) with axle pressure disks, the overhead cylinders enable a very high ground clearance
INFO: For use on unpaved roads and difficult terrains, we recommend a forced steering and a pneumatic or hydraulic running gear

Body: Sidewalls 5 mm, floor sheet 6 mm in one piece, material quality S355/ top frame made of rectangular tube 100 x 80 mm, body beams 200 x 100 mm/ waterproof welded middle and end stanchions/ hydraulic opening rear tailgate with automatic pressing system laterally by means of locking hooks, locking block valve with load safety valve, additional block ball valve at front to prevent unintended opening, standard with closing hook stop mode, i.e. that the closing hooks of the tailgate can be overridden by means of a claw, if necessary/ detachable aluminium access ladder at headboard/ robust rubber supports between body and chassis/ bolted mudguards adjustable in the width with a steep angle of attack and therefore self-cleaning

Other: 40 km/h homologation according to type approval EU (VO) 167/ 2013/ operating instructions/ robust lamp housing with pointed roof at vehicle rear, high-quality rear lights with shock-resistant lens, LED lighting system, white front position lamps, yellow side marker lamps, rear position lights/ exchangeable, modularly designed rear underride guard/ shot peened frame/ painting 2-component paint in Krampe-red (similar to RAL 3002) satin-finish


Technical data: SK 750

*1 Eigengewicht und die Nutzlast hängen von der jeweiligen Ausrüstung ab.
*2 In Deutschland sind Stützlasten von 3 bzw. 4 t nur bis 40 km/h erlaubt. Bei Schnellläufern ab 40 km/h gelten teils niedrigere Stützlasten. Es darf die zulässige Stützlast des Zugfahrzeuges nicht überschritten werden.
*3 Einzelachslast 10 t nur bei Achsabstand 1,81 m zulässig. Beratung erforderlich.
*6 Die technische Nutzlast ist von Fahrwerk und Bereifung abhängig.

Dimensions: SK 750

Ausrüstung wird geladen

Zubehör wird geladen


Professional advice?
Our sales team will be happy to help and answer all your questions about the SK 750.

Krampe sales team



Krampe Fahrzeugbau GmbH

Zusestraße 4 · D-48653 Coesfeld-Flamschen · Tel: +49 (0)25 41/80 178-0 · Fax: +49 (0)25 41/80 178-14 ·

gedruckt 04-02-2023 13:26:31 Uhr