Halfpipe HP 20

Tandem Halfpipe



Tandem Halfpipe
Halfpipe HP 20

For this type of vehicle: Individual vehicle construction possible
Robust earth-moving tipper with halfpipe body and front tipping ram, 40 km/h version
Krampe halfpipe HP 20, the classic on the European construction sites! Often copied and never equalled. Market leader for decades and x-1,000 times in operation!

Chassis: Torsion-resistant chassis made of large-volume rectangular tube 300 x 150 mm/ suspended, height-adjustable drawbar for low hitch position with flanged 80 mm ball head coupling/ hydraulic support foot with double-acting ram, 6/2 way-valve to combine support foot hydraulic <> rear tailgate/ continuous tipping shaft at rear, heavy 80 mm diameter rocking ball bearings/ hole pattern G 140 for rear trailer coupling/ 32 t parabolic springs with trailing arms and dynamic compensation, mounted on the axles for optimum ground clearance/ ALB-valve for automatic braking force control/ BPW axles with automatic slack adjusters (ASA)
INFO: For use on unpaved roads or difficult terrains, we recommend a running gear with pendle axle unit

Body: Stylish halfpipe body, sheet thickness 6 mm, material quality S355/ front protection hood/ front tipping ram for for easy tipping and optimisation of the stability during tipping/ body end at top designed as pointed roof, soil or stones does not remain on it/ hydraulic opening rear tailgate, additional pendulum mounted at top to avoid damages through big stones, cutting edge all around for light and reliable closing of tailgate/ robust rubber supports between body and chassis/ bolted mudguards adjustable in width with a steep angle of attack and therefore self-cleaning/ rear lights mounted on the body at top in the range of the edge mudguards and thus mounted in a particular protected way

Other: 40 km/h homologation according to type approval EU (VO) 167/ 2013/ operating instructions/ robust lamp housing with pointed roof at vehicle rear, high-quality rear lights with shock-resistant lens, LED lighting system, white front position lamps, yellow side marker lamps, rear position lights/ exchangeable, modularly designed rear underride guard/ shot peened frame/ painting 2-component paint in Krampe-red (similar to RAL 3002) satin-finish


Technical data: Halfpipe HP 20

*1 Eigengewicht und die Nutzlast hängen von der jeweiligen Ausrüstung ab.
*2 In Deutschland sind Stützlasten von 3 bzw. 4 t nur bis 40 km/h erlaubt. Bei Schnellläufern ab 40 km/h gelten teils niedrigere Stützlasten. Es darf die zulässige Stützlast des Zugfahrzeuges nicht überschritten werden.
*3 Einzelachslast 10 t nur bei Achsabstand 1,81 m zulässig. Beratung erforderlich.
*6 Die technische Nutzlast ist von Fahrwerk und Bereifung abhängig.

Dimensions: Halfpipe HP 20

Ausrüstung wird geladen

Zubehör wird geladen




Professional advice?
Our sales team will be happy to help and answer all your questions about the Halfpipe HP 20.

Krampe sales team



Krampe Fahrzeugbau GmbH

Zusestraße 4 · D-48653 Coesfeld-Flamschen · Tel: +49 (0)25 41/80 178-0 · Fax: +49 (0)25 41/80 178-14 · Mail:info@krampe.de

gedruckt 29-03-2023 00:16:02 Uhr