Big Body 790 Carrier Carrier series

Professional equipment for highest demands, 40 km/h high-speed version

The trailers of the Carrier series have a firmly specified standard equipment and are usually available ex stocks. Technical changes are not possible.

Chassis: Comprehensive standard equipment/ chassis made of rectangular tubes 300 x 150 mm/ suspended, height-adjustable drawbar for low hitch position resp., 80 mm ball head coupling/ robust hydraulic support foot with double-acting ram, stroke 70 cm/ heavy tipping bearings with exchangeable brass bushes, backlash-free / hole pattern for rear trailer coupling/ Carrier series in standard with air suspended running gear with automatic lowering during tipping, with reversing tap to prevent lowering, so the trailer tipps on the inflated air bellows/ version with BPW axles, wheelbase 1.81 m, caster steering axle at rear/ securing cables

Body/ Other: Sidewalls 4 mm in thickness made of one single sheet, floor plate 4 mm in thickness made of one single sheet, material S 355/ Topframe 100 x 80 mm/ waterproof welded middle and end stanchions/ huge inspection window at front, 72 x 47 cm with galvanized cover plate/ hydraulic opening rear tailgate with automatic and forced shutting system by locking hook and lock-pressure valve, block ball valve at front/ large discharge outlet with long dosing lever 46 x 34 cm (W x H), usable on the right or left hand side/ detachable aluminium access ladder at headboard/ strong rubber supports between body and chassis/ steep, bolted mudguards, selfcleaning, same as lighthousing and underride guard/ LED lighting system/ equipment acc. to German road regulations/ shotpeened frame/ painting 2-component paint in Krampe red (similar to RAL 3002) satin-finish

Technical data

PDF-Download

Big Body 790 Carrier:

Technical data: Big Body 790 Carrier

GVW to Ger. Law	24.000 kg bei 40 km/h
dead weight	ca. 7.350 kg
payload to Ger. law	ca. 16.650 kg
technical payload	ca. 21.900 kg
drawbar	gefederte Zugvorrichtung, höhenverstellbar, zwei Silentblöcke, für Unten- oder Obenanhängung
permissible tongue load	4.000 kg
minimum traction requirement	ab 132 kW (180 PS)
standard supporting device	robuster hydraulischer Abstellfuß, 70 cm Hub, mit doppeltwirkendem Zylinder und großer Fußplatte
oil requirements/ tip angle to the rear	44 l/ 49°
telescoping ram/ Stroke	3.025 mm/ 5-stufig
lift capacity in grain	ca. 23 t
load-sensitive proportional brake valve	ALB
axle diameter/ -stud	BPW 150 x 150 mm/ 10-Loch
brake dimensions	410 x 180 mm
wheel bearing load rating per axle	13 t je Achse bei 40 km/h
running gear	Luftgefedertes Fahrwerk, Zweiblattlenker, Balgdurchmesser 360 mm
wheel base	1,81 m
standard tyres	600/55 R 26,5
max. wheel diameter (as standard)	Niederdruckreifen bis zu einem Felgendurchmesser von 30,5“ können montiert werden
internal body dimensions	8,00 x 2,32/ 2,22 x 1,52 m
body height without silage kit	1,52 m
silage kit, standard heights	40, 60, 80 cm
transport capacity without silage kit	26,9 m³
transport capacity with silage kit 60 cm	37,5 m³
transport capacity with silage kit 80 cm	41,0 m³

Dimensions: Big Body 790 Carrier

body length	^L	8,00 m
body width		2,32 / 2,22 m konisch
body height	^H	1,52 m
hight at 35° tilt and 1.52 m body	^W₃₅	7,15 m
hight at 51° tilt and 1.52 m body	^W₅₁	8,25 m / 49°
dump hight at 35° tilt	^C₃₅	1,53 m
dump hight at 51° tilt	^C₅₁	1,01 m /49°
hitch height	^A	ca. 50 - 70 cm
hitching height	^G	9,89 m
overall height - 1.52 m body	^F	3,07 m
length centre-centre pin	^M	9,10 m
wheel base	^AA	1,81 m
ground clearance	^B	0,98 m