Professional equipment for highest demands, 40 km/h high-speed version

The trailers of the Carrier series have a firmly specified standard equipment and are usually available ex stocks. Technical changes are not possible.

Chassis:
Comprehensive standard equipment/ chassis made of massive rectangular tubes 300 x 100 mm/ suspended, height-adjustable drawbar for low or high hich position resp., 40 mm drawbar eye/ robust hydr. support foot with double-acting ram, stroke 70 cm/ heavy tipping bearings with exchangeable brass bushes, backlash-free / hole pattern for rear trailer coupling/ 24 t parabolic springs with trailing arms and dynamic compensation,mounted above axles for optimum ground clearance, version with BPW axles.

Body/ Other:
Sidewalls 4 mm in thickness made of one single sheet, floor plate 4 mm in thickness made of one single sheet, material S355/ topframe 100 x 80 mm/ waterproof welded middle and end stanchions/ huge inspection window at front, 72 x 47 cm with galvanized cover plate/ hydraulic opening rear tailgate with automatic and forced shutting system by locking hook and lock-pressure valve, addtional block ball valve at front/ large discharge outlet with long dosing lever 46 x 34 cm (W x H), usable on the right or left hand side/ detachable aluminium access ladder at headboard/
strong rubber supports between body and chassis/ steep, bolted mudguards, selfcleaning, same as lighthousing and underride guard/ LED lighting system/ equipment acc. to German road regulations/ shotpeened frame/ painting 2-component paint in Krampe red (similar to RAL 3002) satin-finish